最新发表
-
材料表征与检测技术手册[徐祖耀等 2009.6 书签]
结果: 找到 “材料表征与检测技术手册[徐祖耀等 2009.6 书签]” 相关内容 0 个
-
高性能低碳贝氏体钢——成分、工艺、组织、性能与应用
结果: 找到 “高性能低碳贝氏体钢——成分、工艺、组织、性能与应用” 相关内容 0 个
-
共价有机框架材料 设计、合成与表征 魏浩，吴洋 编著 2017年
共价有机框架材料 设计、合成与表征 魏浩，吴洋 编著 2017年
-
普通高等学校材料科学与工程学科规划教材 材料的化学合成、制备与表征
普通高等学校材料科学与工程学科规划教材 材料的化学合成、制备与表征 顾少轩 主编 2016年
-
高频加热淬火制件的组织与性能
结果: 找到 “高频加热淬火制件的组织与性能” 相关内容 0 个
-
金属材料的高温氧化铁皮
结果: 找到 “金属材料的高温氧化铁皮” 相关内容 0 个
-
材料理化分析
结果: 找到 “材料理化分析” 相关内容 0 个
-
ASTM A920-24e1 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, S
ASTM A920-24e1 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
英文原版(自购)，链接可自动跳转，高清 可复制/搜寻，非扫描或截图版本
-
ASTM A788-25a Standard Specification for Steel Forgings, General Requirements
ASTM A788-25a Standard Specification for Steel Forgings, General Requirements
英文原版(自购)，链接可自动跳转，高清 可复制/搜寻，非扫描或截图版本
-
Guideline of Quality Assurance for Steel Structural Fabrication
Guideline of Quality Assurance for Steel Structural Fabrication
-
What is The Most Common Flare Fittings
What is The Most Common Flare Fittings
-
Soldering and Brazing Copper Tube and Fittings
Soldering and Brazing Copper Tube andFittings
-
Soldadura y Soldadura Reforzada Ajustes y Tubos de Cobre
Soldadura y Soldadura Reforzada Ajustes yTubos de Cobre
-
Copper/Alloy Tube and Pipe
Copper/Alloy Tube and Pipe· Manufacturing Process· Product Specifications· Commodity Tube· Commercial Tube· Pressure Ratings and Allowable Stresses· Joi
-
fatigue performance comparison and life prediction of forged steel and ductile c
fatigue performance comparison and life prediction of forged steel and ductile cast iron crankshafts
-
Prediction of fracture-based fatigue life of connectors for the mobile offshore
Prediction of fracture-based fatigue life of connectors for the mobile offshore base
-
weld quality assessment and control in steel structure fabrication
weld quality assessment and control in steel structure fabrication
-
Fittings, Solders, Fluxes
Fittings, Solders,Fluxes
-
Guide Specification for Copper and Copper Alloy Building Piping Systems
Guide Specification for Copper and CopperAlloy Building Piping Systems
-
EPC Engineering Data
EPC Engineering Data
-
Copper Tube Handbook
Copper Tube Handbook
Industry Standard Guide for the Design and Installation of Copper Piping Systems
-
Copper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings
-
FLANGE DESIGN – Appendix 2 of ASME Section VIII, Division 1
FLANGE DESIGN – Appendix 2 of ASME Section VIII, Division 1
The rules in Mandatory Appendix 2 of ASME Section VIII, Division 1 apply specifically to the design of bolted flange connections with gas
-
环保机械设备设计、制造、安装及质量检测通用标准实用手册 2005
环保机械设备设计、制造、安装及质量检测通用标准实用手册 2005
-
环保机械设备设计、制造、安装及质量检测通用标准实用手册 2005
环保机械设备设计、制造、安装及质量检测通用标准实用手册 2005
-
化工设备制造工艺学实践教程 康勇 主编 2017
化工设备制造工艺学实践教程 康勇 主编 2017
-
化工建筑安装工程预算定额 第三册 工业管道工程 2012
化工建筑安装工程预算定额 第三册 工业管道工程 中国化工集团公司 中国化学工程集团公司 主编 2012
-
化工单元过程及设备课程设计第三版 王瑶 张晓冬 主编 2013
化工单元过程及设备课程设计第三版 王瑶 张晓冬 主编 2013
-
合成树脂及应用丛书 聚丙烯酸树脂及其应用 厉蕾 颜悦 主编 2012
合成树脂及应用丛书 聚丙烯酸树脂及其应用 厉蕾 颜悦 主编 2012
-
工程机械葡汉汉葡双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2012
工程机械葡汉汉葡双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2012
-
工程机械俄汉汉俄双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
工程机械俄汉汉俄双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
-
工程机械西汉汉西双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
工程机械西汉汉西双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
-
工程机械德汉汉德双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
工程机械德汉汉德双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
-
俄汉石油炼制与石油化工词典 大庆石油化工总厂本书编写组 编 许洪明 主编 1984
俄汉石油炼制与石油化工词典 大庆石油化工总厂本书编写组 编 许洪明 主编 1984
-
Exploring the World of Materials
Exploring the World of Materials
PPT
-
Materials Selection and Design
Materials Selection and Design
PPT
-
Material Selection Guide For Mechanical Design
Material Selection Guide For Mechanical Design
TableOf Contents1.Understandingthe Fundamentals of Material Selection2.TheStrategic Material Selection Process2.1.DefiningPerformance Requirements2.2.Ma
-
MATERIALS SELECTION IN MECHANICAL DESIGN
MATERIALS SELECTION IN MECHANICAL DESIGN
INTRODUCTION The performance of an engineering component is limited by the properties of the material of which it is made, and by the shapes to which this m
-
Materials selection for mechanical design
Materials selection for mechanical design
PPT
-
Materials selection in mechanical design-1993
Materials selection in mechanical design-1993
ABSTRACT A novel materials-selection procedure has been developed and implemented in software. The procedure makes use of Materials Selection Charts: a n
-
在设计过程中有效利用材料——不仅仅是选择问题
EFFECTIVE USE OFMATERIALS IN THE DESIGN PROCESS – MORE THAN A SELECTION PROBLEM在设计过程中有效利用材料——不仅仅是选择问题 ABSTRACT This paper is concerned with addressing the common difficulties en
-
工程设计与制造中材料选择流程的开发
Development of A Materials Selection Process inEngineering Design and Manufacturing工程设计与制造中材料选择流程的开发Abstract : - The selection of proper materials is fundamental to engineering desi
-
Failure analysis of steam superheater boiler tube made of ASTM T22 steel
Failure analysis ofsteam superheater boiler tube made of ASTM T22 steelThis study investigates the failure of T22 grade steel boiler tube, as per ASTM A 213/A A213M standards, which experienced signif
-
Failure analysis of the boiler water-wall tube
Failure analysis of the boiler water-wall tube
Abstract: Failure analysis of the boiler water-wall tube is presented in this work. In order to examine the causes of failure, various techniques inclu
-
Analysis of Boiler Tube Failure
Analysis of Boiler Tube Failure
Abstract: The Causes and mechanisms of failure area unit mentioned and recommendation for hindrance of reoccurrence of such failure is provided. The tubes had circumf
-
MATERIAL AND PROCESSES SELECTION IN CONCEPTUAL DESIGN
MATERIAL AND PROCESSES SELECTION INCONCEPTUAL DESIGNMaterials and manufacturing processes are an integral part of the design of a product. The need to combine materials and manufacturing processes sel
-
工程设计与制造中的材料选择——信息处理方法的概念
MaterialsSelection in Engineering Design and Manufacturing – Concept of an InformationProcessing Approach工程设计与制造中的材料选择——信息处理方法的概念 In its essence, the materials selection proce
-
Design for Manufacturing - Guidelines
Design for Manufacturing - Guidelines
Design for Manufacturing (DFM) and design for assembly (DFA) are the integration of product design and process planning into one common activity. The goal is t
-
BOILER TUBE FAILURE ANALYSIS
BOILER TUBE FAILURE ANALYSIS
Abstract Failure of tubes in boiler of the power plants may occur due to various reasons. These include failures due to creep, corrosion, erosion, overheating and a host o
-
Failure Analysis of Boiler Water Wall Tube：A Case Study from Thermal Power Plan
Failure Analysis of Boiler Water Wall Tube：A Case Study from Thermal Power Plant锅炉水冷壁管失效分析：来自热电厂的一个案例研究 Abstract The boiler tube in power plant has been failed after long term
-
Boiler Tube Failure Mechanisms：Case Studies 2023 by Atanu Saha
-
不锈钢的腐蚀 (美)塞德赖克(Sedriks,AJ)着;吴剑译
-
Stress Intensity Factors Handbook 1986 by Y. Murakami
-
High-Temperature Property Data： Ferrous Alloys 1989 by Micheal F. Rothman
-
A PRACTICAL GUIDE TO DESIGN FOR MANUFACTURABILITY
A PRACTICAL GUIDE TO DESIGN FORMANUFACTURABILITYPPT
-
Design for Manufacturing, Assembly, and Reliability
Design for Manufacturing, Assembly, andReliabilityPPT
-
Design for the Additive Manufacturing Process Chain
Design for the Additive Manufacturing Process Chain
Abstract Post-processing operations are required for most additive manufacturing (AM) processes. For production parts, consideration of these post-
-
Pulse of the Profession： Design for Manufacturing
Pulse of the Profession： Design for Manufacturing
-
Flanged fittings
Flanged fittings
Flangedfittings are components used in piping systems to connect pipes, valves, pumps,and other equipment, allowing for easy assembly and disassembly. The keyfeature of flanged fitti
-
Valve Face to Face Dimension Comparison
Valve Face to Face Dimension Comparison
最新回复
-
High-Temperature Property Data： Ferrous Alloys 1989 by Micheal F. Rothman
-
Stress Intensity Factors Handbook 1986 by Y. Murakami
-
Boiler Tube Failure Mechanisms：Case Studies 2023 by Atanu Saha
-
Failure Analysis of Boiler Water Wall Tube：A Case Study from Thermal Power Plan
Failure Analysis of Boiler Water Wall Tube：A Case Study from Thermal Power Plant锅炉水冷壁管失效分析：来自热电厂的一个案例研究 Abstract The boiler tube in power plant has been failed after long term
-
BOILER TUBE FAILURE ANALYSIS
BOILER TUBE FAILURE ANALYSIS
Abstract Failure of tubes in boiler of the power plants may occur due to various reasons. These include failures due to creep, corrosion, erosion, overheating and a host o
-
Design for Manufacturing - Guidelines
Design for Manufacturing - Guidelines
Design for Manufacturing (DFM) and design for assembly (DFA) are the integration of product design and process planning into one common activity. The goal is t
-
工程设计与制造中的材料选择——信息处理方法的概念
MaterialsSelection in Engineering Design and Manufacturing – Concept of an InformationProcessing Approach工程设计与制造中的材料选择——信息处理方法的概念 In its essence, the materials selection proce
-
材料表征与检测技术手册[徐祖耀等 2009.6 书签]
结果: 找到 “材料表征与检测技术手册[徐祖耀等 2009.6 书签]” 相关内容 0 个
-
高性能低碳贝氏体钢——成分、工艺、组织、性能与应用
结果: 找到 “高性能低碳贝氏体钢——成分、工艺、组织、性能与应用” 相关内容 0 个
-
可以领国庆中秋红包啦......
抓紧领国庆中秋红包了.......，
-
共价有机框架材料 设计、合成与表征 魏浩，吴洋 编著 2017年
共价有机框架材料 设计、合成与表征 魏浩，吴洋 编著 2017年
-
普通高等学校材料科学与工程学科规划教材 材料的化学合成、制备与表征
普通高等学校材料科学与工程学科规划教材 材料的化学合成、制备与表征 顾少轩 主编 2016年
-
高频加热淬火制件的组织与性能
结果: 找到 “高频加热淬火制件的组织与性能” 相关内容 0 个
-
金属材料的高温氧化铁皮
结果: 找到 “金属材料的高温氧化铁皮” 相关内容 0 个
-
材料理化分析
结果: 找到 “材料理化分析” 相关内容 0 个
-
ASME VIII-1-2025 A分卷UG-中英
-
化工设备制造工艺学实践教程 康勇 主编 2017
化工设备制造工艺学实践教程 康勇 主编 2017
-
EN欧洲管道相关标准
收集的EN欧洲管道相关标准.
**** 本内容被作者隐藏 ****
-
压力容器焊接工程师应知应会题库
结果: 找到 “压力容器焊接工程师应知应会题库” 相关内容 0 个
-
2025年9月压力容器设计审核换证笔试试卷
结果: 找到 “2025年9月压力容器设计审核换证笔试试卷” 相关内容 0 个
-
大型火电设备手册 除灰与环保设备 中国华电工程(集团)有限公司 2009
大型火电设备手册 除灰与环保设备 中国华电工程(集团)有限公司 上海发电设备成套设计研究院 组编 黄湘 主编 2009
-
化工单元过程及设备课程设计第三版 王瑶 张晓冬 主编 2013
化工单元过程及设备课程设计第三版 王瑶 张晓冬 主编 2013
-
ASTM A920-24e1 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, S
ASTM A920-24e1 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
英文原版(自购)，链接可自动跳转，高清 可复制/搜寻，非扫描或截图版本
-
ASTM A788-25a Standard Specification for Steel Forgings, General Requirements
ASTM A788-25a Standard Specification for Steel Forgings, General Requirements
英文原版(自购)，链接可自动跳转，高清 可复制/搜寻，非扫描或截图版本
-
Guideline of Quality Assurance for Steel Structural Fabrication
Guideline of Quality Assurance for Steel Structural Fabrication
-
weld quality assessment and control in steel structure fabrication
weld quality assessment and control in steel structure fabrication
-
Prediction of fracture-based fatigue life of connectors for the mobile offshore
Prediction of fracture-based fatigue life of connectors for the mobile offshore base
-
fatigue performance comparison and life prediction of forged steel and ductile c
fatigue performance comparison and life prediction of forged steel and ductile cast iron crankshafts
-
What is The Most Common Flare Fittings
What is The Most Common Flare Fittings
-
Soldering and Brazing Copper Tube and Fittings
Soldering and Brazing Copper Tube andFittings
-
Soldadura y Soldadura Reforzada Ajustes y Tubos de Cobre
Soldadura y Soldadura Reforzada Ajustes yTubos de Cobre
-
Copper/Alloy Tube and Pipe
Copper/Alloy Tube and Pipe· Manufacturing Process· Product Specifications· Commodity Tube· Commercial Tube· Pressure Ratings and Allowable Stresses· Joi
-
Fittings, Solders, Fluxes
Fittings, Solders,Fluxes
-
环保机械设备设计、制造、安装及质量检测通用标准实用手册 2005
环保机械设备设计、制造、安装及质量检测通用标准实用手册 2005
-
Guide Specification for Copper and Copper Alloy Building Piping Systems
Guide Specification for Copper and CopperAlloy Building Piping Systems
-
EPC Engineering Data
EPC Engineering Data
-
Copper Tube Handbook
Copper Tube Handbook
Industry Standard Guide for the Design and Installation of Copper Piping Systems
-
Copper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings
-
FLANGE DESIGN – Appendix 2 of ASME Section VIII, Division 1
FLANGE DESIGN – Appendix 2 of ASME Section VIII, Division 1
The rules in Mandatory Appendix 2 of ASME Section VIII, Division 1 apply specifically to the design of bolted flange connections with gas
-
环保机械设备设计、制造、安装及质量检测通用标准实用手册 2005
环保机械设备设计、制造、安装及质量检测通用标准实用手册 2005
-
不锈钢的腐蚀 (美)塞德赖克(Sedriks,AJ)着;吴剑译
-
Exploring the World of Materials
Exploring the World of Materials
PPT
-
Materials Selection and Design
Materials Selection and Design
PPT
-
MATERIAL AND PROCESSES SELECTION IN CONCEPTUAL DESIGN
MATERIAL AND PROCESSES SELECTION INCONCEPTUAL DESIGNMaterials and manufacturing processes are an integral part of the design of a product. The need to combine materials and manufacturing processes sel
-
Analysis of Boiler Tube Failure
Analysis of Boiler Tube Failure
Abstract: The Causes and mechanisms of failure area unit mentioned and recommendation for hindrance of reoccurrence of such failure is provided. The tubes had circumf
-
Failure analysis of the boiler water-wall tube
Failure analysis of the boiler water-wall tube
Abstract: Failure analysis of the boiler water-wall tube is presented in this work. In order to examine the causes of failure, various techniques inclu
-
Failure analysis of steam superheater boiler tube made of ASTM T22 steel
Failure analysis ofsteam superheater boiler tube made of ASTM T22 steelThis study investigates the failure of T22 grade steel boiler tube, as per ASTM A 213/A A213M standards, which experienced signif
-
工程设计与制造中材料选择流程的开发
Development of A Materials Selection Process inEngineering Design and Manufacturing工程设计与制造中材料选择流程的开发Abstract : - The selection of proper materials is fundamental to engineering desi
-
化工建筑安装工程预算定额 第三册 工业管道工程 2012
化工建筑安装工程预算定额 第三册 工业管道工程 中国化工集团公司 中国化学工程集团公司 主编 2012
-
在设计过程中有效利用材料——不仅仅是选择问题
EFFECTIVE USE OFMATERIALS IN THE DESIGN PROCESS – MORE THAN A SELECTION PROBLEM在设计过程中有效利用材料——不仅仅是选择问题 ABSTRACT This paper is concerned with addressing the common difficulties en
-
Materials selection in mechanical design-1993
Materials selection in mechanical design-1993
ABSTRACT A novel materials-selection procedure has been developed and implemented in software. The procedure makes use of Materials Selection Charts: a n
-
MATERIALS SELECTION IN MECHANICAL DESIGN
MATERIALS SELECTION IN MECHANICAL DESIGN
INTRODUCTION The performance of an engineering component is limited by the properties of the material of which it is made, and by the shapes to which this m
-
合成树脂及应用丛书 聚丙烯酸树脂及其应用 厉蕾 颜悦 主编 2012
合成树脂及应用丛书 聚丙烯酸树脂及其应用 厉蕾 颜悦 主编 2012
-
工程机械葡汉汉葡双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2012
工程机械葡汉汉葡双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2012
-
工程机械俄汉汉俄双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
工程机械俄汉汉俄双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
-
工程机械西汉汉西双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
工程机械西汉汉西双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
-
工程机械德汉汉德双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
工程机械德汉汉德双向词典 大连理工大学 徐州工程机械集团有限公司 编写 2011
-
俄汉石油炼制与石油化工词典 大庆石油化工总厂本书编写组 编 许洪明 主编 1984
俄汉石油炼制与石油化工词典 大庆石油化工总厂本书编写组 编 许洪明 主编 1984
-
石油化工施工作业安全风险分析与控制 朱以刚 编著 2014
石油化工施工作业安全风险分析与控制 朱以刚 编著 2014
-
Materials selection for mechanical design
Materials selection for mechanical design
PPT
EN欧洲管道相关标准53 阅读国外资料分享区
EPC Engineering Data0 阅读国外资料分享区
Copper Tube Handbook0 阅读国外资料分享区
论坛事务
外语角
休闲娱乐
招聘求职
广告信息
微信公众号
官方抖音号